September 24, 2017

services

Mistakes To Avoid If You Are Going To Make Money With Cell Tower Leases

More and more people today are making money with cell tower leases. They are putting the cell towers on their property, which can bring in additional revenue with very little hassle. Unfortunately, many property owners are making mistakes regarding negotiating and structuring the lease, and they are losing money. To be sure that you are getting the most money possible, there are a few mistakes that you should avoid is you are going to make money with cell tower leases. Tip #1 Don’t Let The Cell Tower Company Undervalue You Most people look at their cell tower lease like a DIY project. They use the internet to learn everything that they think they need to know. Unfortunately, most of the information found online is incorrect. Most cell tower companies expect you to have incorrect information and they use this to increase their revenue and take your money from you. According to a study performed in 2016, the three largest cell tower companies earned over $12 billion in revenue. Only 16 percent of that money was paid to the property owners as rent payments. This is because, during negotiations, the property owners accepted a much lower offer than they deserved because they didn’t understand the in’s and out’s of cell tower leases. Be sure that the information that you are getting about leases is correct before you negotiate a lease. Tip #2 Don’t Make Quick Decisions When cell tower companies talk to property owners to enter into a new lease or to extend an existing one, they will often set a time limit for the property owner to make a decision. They do this so that the owner doesn’t have time to do their due diligence so that they can get a fair offer. They know that quick decisions lead to mistakes. Many companies will make threats. They will tell you that with a new lease that you will lose rent if you don’t agree. On an existing lease, they will threaten to remove the cell tower from your property and relocate it. This could cause you to lose all of your revenue. You should remember that it is your property and they need you. Take your time before making a decision. Tip #3 Don’t Fall Into the “Market Rent” Excuse Many cell tower companies will use the term, “market rate” when trying to negotiate a price for a new or existing cell tower lease. Most property owners look at this like a traditional real estate transaction, therefore, they fall into the market rate excuse. A cell tower lease is not a real estate transaction, it is a utility transaction. Many cell tower companies will expect you to work at the market rate that was created by bad deals that cell tower landlords made over 20 years ago. If a cell tower company starts to talk about the market rate, you should cut them off immediately. Let them know that you understand that your deal will be a utility transaction rather than a real estate transaction, and the market rate does not apply. Putting a cell tower on your property for a profit is a great way to make money, however, you are going to need to know what you are doing. If you know what types of mistakes to avoid, you can earn a good deal of money and you won’t be taken for a ride by the cell tower company.

Marketing

What Every Business Owner Ought To Know About Social Mobile Marketing

The number of mobile users on social media is at an all-time high, and the figures are set to go even higher in the near future. According to recent research, there are currently five billion mobile users around the world, and of all these, about one billion use smartphones. In view of this, every business has to take action and make use of social mobile marketing so as not to miss out on the opportunities generated by this segment. Over 95 percent of users who spend their time on Twitter do so through mobile apps, whereas about 80 percent of the traffic on Facebook comes from mobile gadgets. Other than that, more than any other mobile app, Facebook is the most downloaded, meaning there is a very large number of mobile users who have shifted from computer browsing to mobile usage, and this audience has a great influence on social conversations. With this in mind, it’s only sensible for a business to implement concrete strategies in order to meet the requirements of these mobile customers. Getting Started With Social Mobile Marketing In today’s business environment, optimizing your site for mobile use is inevitable; thus, you have to ensure that you leverage all the social networks to generate more leads and create increased awareness for your brand as well. To achieve this, you need to begin by adjusting all your Facebook activities to ensure that they suit mobile users. This essentially indicates that you should create meaningful content, leverage on effective media buying and planning, and post your Facebook messages at the right times. Other than that, the percentage of mobile users on Twitter has increased by millions and compared to customers who use desktops, mobile users are way more active. Therefore, if you use Twitter for business, you have to structure your campaigns for mobile use. You can do this by leaving room for people to retweet and keeping your campaign messages brief. You have to be careful with how you use the hashtag though; overusing this feature will not yield any gain — you should only apply what is relevant to your brand. Conclusion There are many solid techniques that one can employ in order to integrate social mobile marketing into business campaigns. However, the most important thing to do upfront is to ensure that your site is mobile friendly because with this, you can be confident to reach your audience regardless of the devices they are on. Social media marketing may seem like an elusive task but by making use of the abovementioned tools and tips, you can be sure to get it done the right way.

Automotive

Affordable Windscreen Replacement In Perth

When you use your car on a daily basis, anything can happen. However, one of the most inconvenient issues that could arise is a windscreen problem. Your windscreen is your main tool when driving and needs to be in one hundred percent working condition so you can drive and do so responsibly. Windscreen issues usually start with a small chip. When these chips are left unattended it turns into cracks and if that is ignored, you are asking for big problems. Chips are not a major repair job and can be fixed quickly and easily. However, while certain cracks may also be repair the majority of them are irreparable. This means that your windscreen will need to be replaced. Many vehicle owners shy away from this as they assume that windscreen replacement is a huge cost. This is not really the case. It all depends on where you get your windscreen replacement. The windscreen replacement cost in Perth is quite reasonable and the quality of work is well done. So why not take your vehicle over to one of the trusted and reliable windscreen replacement shops in Perth and get a quote. You are not obligated to get a quote from one or any one particular shop. So shop around and get as many quotes as you possibly can. Windscreen replacement in Perth can be incredibly competitive. If you have comprehensive car insurance, you may be able to recover the cost of your windscreen replacement from your insurer. If you do not have insurance, you can still find what you are looking for at affordable prices. The cost if windscreen replacement is not an indication of the quality of work done. So just because a certain service provider charges you double what the previous car repair shop quoted you doesn’t mean that they are better in any way. So it is a good idea to go by the company’s reputation instead. Word of mouth means a lot and you can tell a lot about a company from what people are saying about them. You can also tell a lot about what your experience with a certain company is going to be like by how they have dealt with previous customers. So make a well informed decision by doing your homework on the car repair shop before deciding to do business with them. A little patience and a lot research on any given company will ensure that you have no regrets after paying for their services. Windscreen replacement doesn’t need to be costly if you deal with the right company.

Construction

Structural Steel Fabrication In Perth

Ever since the use of steel in the building construction industry began, skyscapers have rapidly been put up. Today, the tallest buildings in the world boast thousands and thousands of tonnes of steel in their structure. Steel is used to create foundations, making floors, columns and beams as well as in roofing. When looking for structural steel fabrication in Perth, it is crucial for builders to contract the most experienced service providers to do the job. Roofing Structure It is not just skyscapers that require structural steel. Residential and commercial buildings as well as warehouses and sporting stadia also require structural roofing steel. To make a steel structure for a roof, girders and ties have to be welded together at the right angles and properly to ensure the joints are well secured. There will also be joints to be connected with bolts and nuts. All these provisions must be incorporated during design and fabrication. All the welded joints must be checked to ensure the angles meet the required specifications while the welds are perfect. Steel Reinforcement in Buildings The modern skyscraper is made by connecting steel beams and columns one floor after the other. All the floors are normally installed after wards by placing sheet metal made from steel on top of these beams that run across the different floors. To ensure the building is made to perfection, builders need to hire competent firms to design, fabricate and install structural steel. Factors to Consider There are many factors to consider when looking for a structural steel fabricator. They include; i) Experience You do not want your project to be the first one the firm is handling. Therefore, you should take your time to identify the most experienced structural steel fabrication company in Perth. The number of years the fabricator has been in business as well as the number of building projects they have worked on in the recent years should all be checked. Just go through the list of projects the company has handled and make a decision. ii) Cost A steel structure may be much stronger than your average building. However, it is also much more expensive to build. Therefore, it is always a good idea to take your time to obtain quotes and compare costs to ensure you find the most affordable fabricator. The assurances and guarantees offered by a company, their insurance policy and performance bond should all be considered. This will go a long way in ensuring you find the most suitable company for the job. Be sure to also check the type of technologies used by the company to fabricate steel structures.