Whether you are trying to save money on a new garage door or looking for ways to repair a damaged one, several options are available. You can find the best solution to your garage door problems, from replacing a broken part to replacing the springs.
Crooked or Sagging door
Whether your garage door is crooked or sagging, many solutions can be used to fix the problem. The best options include DIY or calling a professional for a repair job. Often the damage is cosmetic, so it is usually cheaper to fix than replace.
Suppose your garage door sags or sticks; you may have a strut issue. These struts are made from thin metal and are not easy to replace. A garage door strut is usually two inches tall and designed to carry the door load to the rollers. If you have a double car door, you should install a 20-gauge strut.
Another common problem is that the door is sagging in the middle. A few factors can cause this, but the main cause is damage.
Noisy door
Getting your noisy garage door repaired is not always a daunting task. You can often fix your noisy garage door with simple household tools.
One way to keep your garage door from making noise is to ensure it is properly lubricated. It is also important to tighten the hardware on your door. This will ensure that the carriage bolt heads are not trapped in the door’s skin.
Using a vacuum to clean the tracks may also help. If your door is making noise, it is probably due to loose track bolts or debris.
The best way to handle this problem is to find a repair technician who can help you. This is a good way to avoid costly repairs.
Torsion springs
Typically, garage doors are made up of three parts: the torsion spring, the shaft, and the winding bars. These three parts are connected together to make the spring work properly. If your torsion spring is broken, you must replace it immediately. Torsion springs are a bit more difficult to replace than extension springs and should be done only by a professional.
Before you begin, you need to measure the spring. You want to make sure that you measure it from end to end. If you do not, you might end up with the wrong size spring.
To measure the spring, you need to use a micrometer or caliper. Unfortunately, calipers are less accurate than a micrometer. You can find these at your local hardware store.
In conclusion, repairing a garage door can be a relatively simple task, depending on the problem. Whether you repair it yourself or hire a professional, make sure you are familiar with the materials, tools, and safety procedures necessary for the job. Taking action sooner rather than later is important to prevent further damage or potential injury. With a little research and preparation, your home’s garage door will be back in perfect condition in no time.
