A Guide on How to Avoid Mistakes during Screen Printing Sacramento, Producing quality graphics after every printing exercise will always give you perfect satisfaction. There are several practices you can utilize when running every print to improve the quality of the prints that you make every time you use screen printing. These practices will help you reduce the waste of time and save the damages of the inventories. This post focuses on highlighting the essential tips to avoid common mistakes during Screen Printing Sacramento.
Ensure you check the machine that you use to print your screens between every run. The machines’ contact motion can make the screws that hold the screen printing press to become loose. The screws that hold the screens and pallets may loosen when you during or at the end of the printing. Loose screws may shake the machine during printing and cause blurred images. It is thus essential to check the machine after every print.
Start every printing with graphics of excellent quality. Starting with quality artwork will help you to have excellent screen prints. Setting a low resolution will make your images fuzzy. You must adequately separate the colors to achieve quality graphics.
Always check the screen tension and use the appropriate screens. You may choose screens with lower mesh count, but those with higher counts are necessary for detailed screen prints. It is essential to establish the screen’s tension once you have selected the right choice for you before your print. Reduced tension on the screens can cause blurring on the images.
Ensure you have proper off-contacts. It is essential to set ideal off-contact early enough before every print session to get a quality screen of the final image. The off-contact enables the screen to contact the substrate when printing slightly. It then pulls the screen cleanly away to leave behind and precise print.
It is imperative to make use of the right pressure and squeegee angle. The angle that you set when holding squeegee during a manual printing of the screen has a huge impact on the ink deposit. The pressure that you apply to the squeegee when pushing and pulling will also impact the ink deposition. It is thus essential to sufficient even pressure to ensure you evenly distribute ink on the substrate.
It is imperative to always perform a test run before embarking on the actual printing. The test run will help you to ensure that the press is set, the screens are clean and tight, and registration is on the spot. It is convenient and affordable to adjust the machines during the test run than discarding the whole screen after producing undesirable prints.